Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Workshop Manual / Heating, Ventilation & Air Conditioning / Refrigerant Circuit Components, Replacing

Audi A6 Typ 4G: Refrigerant Circuit Components, Replacing

READ NEXT:

 General Information

Vehicles with a High Voltage System (Hybrid Vehicles) Extremely Dangerous Due to High-Voltage The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock. - I

 Leaking or Damaged Components except A/C Compressor, Reservoir or Receiver/Dryer

The refrigerant circuit was completely empty (for example with larger leak or cracked hose)   Note In the event of only a minor leak with slow escape of refrigerant (e.g. at a small leakage

 Compressor, Replacing without the Need for Flushing Refrigerant Circuit

  Note Cleaning the refrigerant circuit means flushing with refrigerant R134a. Refer to → Chapter "Refrigerant Circuit, Cleaning (Flushing), with Refrigerant R134a". If a faulty A/C

SEE MORE:

 Trim Molding, Removing and Installing

Roof Trim Molding, Removing and Installing Special tools and workshop equipment required Trim Removal Wedge -3409- Removing   Note Do not bend the roof trim molding. Tape around the roof trim molding on the A-pillar to prevent damaging the paint. - Open the front and rear doors.

 Tires and vehicle load limits

There are limits to the amount of load or weight that any vehicle and any tire can carry. A vehicle that is overloaded will not handle well and is more difficult to stop. Overloading can not only lead to loss of vehicle control, but can also damage important parts of the vehicle and can lead to sud

© 2011-2024 Copyright www.aa6.tochrfr.com