Audi A6 Typ 4G: Removing the integrated mechanical key
Fig. 16 Remote control master key: removing the mechanical key
- Press the release button A fig. 16.
- Pull the mechanical key B out of the remote
control key.
LED and batteries in the remote control key
Fig. 17 Remote control key: removing the battery holder
LED in the remote control key
The LED (A) informs you about the function of the
remote control key.
Replacing the remote control key battery
- Remove the mechanical key.
- Press the release button (B) on the battery
holder and pull the battery holder out of the remote
control key in the direction of the arrow
at the same time.
- Insert the new battery with the "+" symbol facing
down.
- Slide the battery holder carefully into the remote
control key.
- Insert the mechanical key.
For the sake of the environment
Discharged batteries must be disposed of using
methods that will not harm the environment.
Do not dispose of them in household
trash.
Tips
The replacement battery must meet the same
specifications as the original battery in the remote
control key.
READ NEXT:
Fig. 18 Remote control key: button programming
To unlock the vehicle, press the
button
fig. 18.
To lock the vehicle, press the
button one
time .
To unlock the luggage compartment lid, press
Applies to: vehicles with convenience key
The doors and luggage compartment lid con be
unlocked/locked without using the remote control
key.
Fig. 19 Door handle: locking the vehicle
Unlocking the veh
Fig. 20 Driver's door: central locking switch
Fig. 21 Rear door: central locking switch
To lock the vehicle, press the
button
.
To unlock the vehicle, press the
button.
When locking the veh
SEE MORE:
Applies to: vehicles with selective catalytic reduction
Closing the filler neck
Turn the cap on the filler neck to the right with
the wheel wrench until the cap clicks into place.
This tightens the cap to the specification.
Then press on the left side of the tank door until
it latches.
After
Overview - Brake Pedal
WARNING
Risk of accident!
The path of the brake pedal must not be shortened by
extra floor mats.
Note
Lubricate all bearing and contact surfaces with Grease -G
000 450 02-.
1 - Brake Pedal
Disconnecting from brake booster. Refer to
→ Ch