Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Owner's Manual / Safety / Safety belts / Unfastening safety belts

Audi A6 Typ 4G: Unfastening safety belts

Unbuckle the safety belt with the red release button only after the vehicle has stopped.

Safety belts
Fig. 151 Releasing the tongue from the buckle

  • Push the red release button on the buckle fig. 151. The belt tongue will spring out of the buckle.
  • Let the belt wind up on the retractor as you guide the belt tongue to its stowed position.

WARNING

Never unfasten safety belt while the vehicle is moving. Doing so will increase your risk of being injured or killed.

Adjusting safety belt height

With the aid of the safety belt height adjustment, the three point safety belt strap routing con be fitted to the shoulder area, according to body size.

Safety belts
Fig. 152 Safety belt height adjustment for the front seats - loop-around fittings

The shoulder belt should lie as close to the center of the collar bone as possible and should fit well on the body.

  • Push the loop-around fittings up fig. 152 2, or
  • squeeze together the 1 button, and push the loop-around fittings down 2.
  • Pull the belt to make sure that the upper attachment is properly engaged.

WARNING

Always read and heed all WARNINGS and other important information.

Tips

With the front seats, the height adjustment of the seat can also be used to adjust the position of the safety belts.

Improperly worn safety belts

Incorrectly positioned safety belts con cause severe injuries.

Wearing safety belts improperly can cause serious injury or death. Safety belts can only work when they are correctly positioned on the body.

Improper seating positions reduce the effectiveness of safety belts and will even increase the risk of injury and death by moving the safety belt to critical areas of the body. Improper seating positions also increase the risk of serious injury and death when an airbag deploys and strikes an occupant who is not in the correct seating position.

A driver is responsible for the safety of all vehicle occupants and especially for children.

Therefore:

  • Never permit anyone to assume an incorrect sitting position in the vehicle while traveling.

WARNING

Improperly worn safety belts increase the risk of serious personal injury and death whenever a vehicle is being used.

  • Always make sure that all vehicle occupants are correctly restrained and stay in a correct seating position whenever the vehicle is being used.
  • Always read and heed all WARNINGS and other important information.

    READ NEXT:

     Belt tensioners

    How safety belt pretensioners work In front, side and rear-end collisions above a particular severity and in a rollover, safety belts are tensioned automatically. Reversible safety belt tensioners The

     Service and disposal of safety belt pretensioner

    The safety belt pretensioners are parts of the safety belts on your Audi. Installing, removing, servicing or repairing of belt pretensioners can damage the safety belt system and prevent it from worki

     Airbag system

    SEE MORE:

     Socket Illumination Bulb -L42-, Removing and Installing

    Socket Illumination Bulb -L42- Removing and Installing, 12 V Socket -U5- Special tools and workshop equipment required Removing - Remove the center console storage compartment. Refer to → Body Interior; Rep. Gr.68; Center Console; Overview - Center Console. - Free up th

     Belt tensioners

    How safety belt pretensioners work In front, side and rear-end collisions above a particular severity and in a rollover, safety belts are tensioned automatically. Reversible safety belt tensioners The safety belts on the front seats are equipped with power reversible tensioners. The following functi

    © 2011-2024 Copyright www.aa6.tochrfr.com