Audi A6 Typ 4G: General, Technical data
READ NEXT:
Note
Pyrotechnic components:
Airbag units
Belt tensioner
Belt force limiter (depending on equipment)
Battery cut-off components (depending on equipment)
General
Caution
Testing, as
All damaged securing pieces must be replaced, you cannot
reshape components or "make them fit".
The following components must be checked after every airbag
deployment.
With A Passenger Airbag Deploy
SEE MORE:
Overview - Headlamp, Halogen Headlamps
1 - Headlamp Housing
USA: the front side marker lamp bulb is an LED and is integrated in
the headlamp housing. The LED cannot be replaced. The entire headlamp
must be replaced.
Removing and installing. Refer to
→ Chapter "Headlamp Housi
Overview - Driver Side Airbag
1 - Locking Bracket
Use a T25 TORX screwdriver, approximately 100 mm long
2 - Steering Column Electronics Control Module -J527-
With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and
Steering Angle Sensor -G85-
Removing and instal
Pyrotechnic Components Safety Precautions
