Audi A6 Typ 4G: Service interval display
The service interval display detects when your vehicle
is due for service.
The service interval display works in two stages:
- Inspection or oil change reminder: after a certain
distance driven, a message appears in the instrument cluster display each
time the ignition
is switched on or off. The remaining distance
or time is displayed briefly.
- Inspection or oil change due: if your vehicle
has reached an inspection or oil change interval
or both intervals at the same time, the message
Inspection due! or Oil change due! or Oil
change and inspection due! appears briefly after
switching the ignition on/off.
Checking service intervals
You can check the remaining distance or time until
the next oil change or next inspection in the
Car menu. To do this, select: the [CAR] function
button > (Car) Systems control button > Service
& checks > Service intervals.
Resetting the indicator
Your authorized Audi dealer or authorized Audi
Service Facility will reset the service interval display
after performing service.
If you have changed the oil yourself, you must reset
the oil change interval.
To reset the indicator, select: the |CAR| function
button > (Car) Systems control button > Service
& checks > Service intervals. Turn the control
knob downward to Reset oil change interval and
press the control knob.
Note
- Only reset the oil change indicator if the oil
was changed.
- Following the service intervals is critical to
maintaining the service life and value of
your vehicle, especially the engine. Even if
the mileage on the vehicle is low, do not exceed
the time for the next service.
- Calculating the time to the next oil change
is interrupted when the vehicle battery is
disconnected.
READ NEXT:
General information
Check your tires regularly for
damage (punctures, cuts, cracks
and bulges). Remove foreign objects
from the tire tread.
If driving over curbs or similar
obstacles, drive slo
Fig. 188 Tire designations on the sidewall
Tires for passenger vehicles
(if applicable)
P indicates a tire for a passenger
vehicle. T indicates a tire designated
for temporary use.
Nominal widt
SEE MORE:
Driveshaft, Removing and Installing, Driveshaft Connected on
Transmission Side
Special tools and workshop equipment
required
Transmission Support -VW785/1B-
Counterhold - Kit - Multiple Use -T10172-
Counterhold - Kit - Adapter 5 -T10172/5-
Hose Clip Pliers -VAG1275A-
High Temperature Grease
General Information
The anti-theft immobilizer system control module can
depending on the vehicle be integrated in the following systems:
Instrument Cluster Control Module -J285-
Comfort System Central Control Module -J393-
Access/Start Authorization Control Module -J518-
Additionally dependin