Audi A6 Typ 4G: Roof rack
Applies to: vehicles with roof rack
Fig. 65 Attachment points for the roof rack
If luggage or cargo is to be carried on the roof,
you must observe the following:
- Only a specially designed roof rack may be used
on your vehicle. These roof racks are the basis
for a complete roof rack system. Additional attachments/
carrier systems are necessary to
transport luggage and sports equipment. We
recommend roof racks and attachments from
the Audi Genuine Accessories program.
- When installing the roof rack, make sure that it
is mounted only at the designated points on
the roof
fig. 65.
- The permissible roof load for your vehicle is
220 lbs (100 kg). The roof load is the total of
the weight of the roof rack, the attachments
and the cargo you are carrying. However, you
must also note the permitted load of the carrier
system being used. For the permitted axle
load and the permitted total vehicle weight.
WARNING
- Follow the installation instructions provided
with the roof rack system. If you do not secure
the roof rack system and objects on the
roof correctly, they could come loose from
the vehicle and cause an accident.
- Using a roof rack system increases the risk
of an accident, because it changes the driving
characteristics by shifting the center of
gravity and/or the increasing the surface
area exposed to wind. Adapt your driving
and speed to the current conditions.
Note
Make sure that the luggage compartment lid
and the sunroof do not come into contact
with objects on the roof when they are open.
For the sake of the environment
Your vehicle will require more fuel due to the
increased wind resistance. So remove the roof
rack after using it.
READ NEXT:
General information
WARNING
Read and follow the important safety precautions
in Storing cargo correctly.
Increasing the size of the luggage
compartment
Applies to: vehicles with folding backrests
The
Applies to: vehicles with tie-downs
Fig. 67 Luggage compartment: location of the tie-downs
To secure objects, for example using the luggage
compartment net, fold the tie-down retainer
upward.
Lu
Applies to: vehicles with bag hooks
Fig. 69 Luggage compartment: storage hooks
You can also use the hooks to hang light purses,
bags, etc.
WARNING
The hooks can hold a maximum weight of 6.6
lbs (3 kg
SEE MORE:
All damaged securing pieces must be replaced, you cannot
reshape components or "make them fit".
The following components must be checked after every airbag
deployment.
With A Passenger Airbag Deployment
Instrument panel central tube, passenger airbag supports and
passenger airbag must be instal
Left Seal, Replacing
Special tools and workshop equipment
required
Used Oil Collection and Extraction Unit -SMN372500-
Seal Installer - Flange Shaft -T40164-
Grease. Refer to the Parts Catalog.
Procedure
Secure the transmission on the Engine And Transmission
Holder -VAS6095-. Refer to
→&