Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Owner's Manual / Maintenance and Care / Checking and Filling / Windshield washer system

Audi A6 Typ 4G: Windshield washer system

Checking and Filling
Fig. 187 Engine compartment: washer fluid reservoir cap

The windshield washer reservoir contains the cleaning solution for the windshield and the headlight washer system.

To reduce the risk of lime scale deposits on the spray nozzles, use clean water with low amounts of calcium. Always add window cleaner to the water.

When the outside temperatures are cold, an anti-freezing agent should be added to the water so that it does not freeze.

Note

  • The concentration of anti-freezing agent must be adjusted to the vehicle operating conditions in the respective climate. A concentration that is too high can lead to vehicle damage.
  • Never add radiator anti-freeze or other additives to the washer fluid.
  • Do not use a glass cleaner that contains paint solvents, because this could damage the paint.

    READ NEXT:

     Service interval display

    The service interval display detects when your vehicle is due for service. The service interval display works in two stages: Inspection or oil change reminder: after a certain distance driven, a me

     Wheels

     Wheels and Tires

    General information Check your tires regularly for damage (punctures, cuts, cracks and bulges). Remove foreign objects from the tire tread. If driving over curbs or similar obstacles, drive slo

    SEE MORE:

     Overview - Suspension Strut, Shock Absorber and Spring

    Overview - Suspension Strut, Shock Absorber and Spring, Coil Spring 1 - Wheel Bearing Housing 2 - Stone Chip Protection 3 - Lower Spring Plate Note the installed position. Refer to → Fig. "Lower Spring Plate Installed Position". 4 - Coil Spring

     Left/Right HID Headlamp Control Module -J343-/-J344-, Removing and Installing

    Left/Right HID Headlamp Control Module -J343-/-J344-, Removing and Installing, through MY 2014   WARNING Danger to life due to high voltage. For work on the yellow high voltage symbol marked areas HID headlamp must be de-energized. Turn off the ignition and all electrical consumers and

    © 2011-2025 Copyright www.aa6.tochrfr.com