Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Owner's Manual / Driver assistance / Parking systems / General information

Audi A6 Typ 4G: General information

Applies to: vehicles with parking system plus/rearview camera/ peripheral camera

Depending on your vehicle's equipment, various parking aids will help you when parking and maneuvering.

The parking system plus assists you when parking by audibly and visually indicating objects detected in front of and behind the vehicle.

The rearview camera shows the area behind the vehicle in the Infotainment system display. This display assists you when you are cross or parallel parking. The parking system plus functions are also available.

The peripheral cameras assist you with parking and maneuvering. You are aided by various cameras depending on the vehicle equipment level. The parking system plus functions are also available.

WARNING

  • Always look for traffic and check the area around your vehicle by looking at it directly as well. The parking system cannot replace the driver's attention. The driver is always responsible when entering or leaving a parking space and during similar maneuvers.
  • Please note that some surfaces, such as clothing, are not detected by the system.
  • Sensors and cameras have blind spots in which people and objects cannot be detected.

    Be especially cautious of small children and animals.

  • The sensors can be displaced by impacts or damage to the radiator grille, bumper, wheel housing and the underbody. The parking system may be impaired as a result.

    Have an authorized Audi dealer or authorized Audi Service Facility check their function.

  • Make sure the sensors are not obstructed by stickers, deposits or other materials. If they are, the sensor function could be impaired.

Note

  • Some objects are not detected or displayed by the system under certain circumstances:
    • Objects such as barrier chains, trailer draw bars, vertical poles or fences
    • Objects above the sensors such as wall extensions
    • Objects with certain surfaces or structures such as chain link fences or powder snow
  • If you continue driving closer to a low object, it may disappear from the sensor range. Note that you will no longer be warned about this obstacle.
  • Keep enough distance from the curb to reduce the risk of damage to the rims.

Tips

  • The system may provide a warning even though there are no obstacles in the coverage area in some situations, such as:
    • certain road surfaces or when there is tall grass.
    • external ultrasonic sources such as from cleaning vehicles.
    • in heavy rain, snow, or thick vehicle exhaust.
  • We recommend that you practice parking in a traffic-free location or parking lot to become familiar with the system. When doing this, there should be good light and weather conditions.
  • You can change the volume and pitch of the signals as well as the display.
  • Please refer to the instructions for towing a trailer located.
  • What appears in the infotainment display is somewhat time-delayed.
  • The sensors must be kept clean and free of snow and ice for park aid to operate.

    READ NEXT:

     Parking system plus

    Description Applies to: vehicles with parking system plus Parking system plus provides audio and visual signals when parking. Fig. 116 Display field Sensors are located in the front and rear bumpers.

     Rearview camera

    Introduction Applies to: vehicles with rearview camera Fig. 118 Illustration: Cross parking Fig. 119 Illustration: parallel parking The rearview camera gives you two views: you can use Cross parking

     Perpendicular parking

    Applies to: vehicles with rearview camera This view may be used when parking in a garage or in a parking space. Fig. 122 Infotainment system: aiming at a parking space Fig. 123 Infotainment system:

    SEE MORE:

     Driver Side Instrument Panel Cover, Removing and Installing

    Driver Side Instrument Panel Cover, Removing and Installing Special tools and workshop equipment required Wedge Set -T10383- Removing - Remove the driver side instrument panel side cover. Refer to → Chapter "Instrument Panel Side Cover, Removing and Installing". - Remove the sid

     Airbag Fasteners, Checking After a Collision

    All damaged securing pieces must be replaced, you cannot reshape components or "make them fit". The following components must be checked after every airbag deployment. With A Passenger Airbag Deployment Instrument panel central tube, passenger airbag supports and passenger airbag must be instal

    © 2011-2024 Copyright www.aa6.tochrfr.com